The antennas are characterized by a number of parameters. Radiation pattern is a graphic representation of radiation characteristics of an antenna according to direction (azimuth and elevation coordinates). Most often represent the radiated power density, but also can find diagrams or phase bias (military antennas). Considering the radiative pattern, we can make a general classification of types of antenna and we can define the directivity of a receiver (isotropic antenna, directional, bi-directional, omni).
Most radio aerials today is primarily designed to be able to send or receive radio waves in a narrow frequency band, for example. FM via VHF band II (87.5-108 MHz). Masts propagate / receives radio waves through coupling with the alternating magnetic field. These types of antenna are used for long-wave, medium-wave and short-wave up to about 6MHz. It is possible to realize antennas that operate according to this principle, up to 60 MHz.
Beamwidth: The angular range of directions in which the radiation of a beam takes a value 3 dB below the maximum. The direction in which the radiated power is halved. Ratio at the secondary main lobe (SLL): The ratio in dB between the maximum value of main lobe and the maximum value of secondary lobe. Front-back ratio (FBR): The ratio in dB between the value of maximum radiation and the same direction and opposite direction.
Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.
A transmitter with more than about 3 items are usually less sensitive in a circle slice perpendicular towards the main direction of a jet and therefore one can put antennas in close proximity to a base station. The distance between the antennas should be at least 1 / 2-1 of main wavelengths used. Further away than about 10 wavelengths (far field) affects largely the antenna radiation pattern, but it can affect radio propagation or radio broadcast.
The antenna location should have unrestricted access to just above the the sky. Earth would reflect more or less of radio waves. This depends on: mast placed as high as possible so that there are no obstructions between the transmitter and receiver. Satellite or interstellar radio propagation (Earth to satellite, space shuttle) or (satellite, space shuttle to Earth). There must be no obstructions between the satellite and ground transmitters.
The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.
If, in each of these ports, a diplexer, which separates the frequency bands of emission and reception, it will be a feeder four ports with a single antenna will be able to send and receive both polarizations simultaneously placed. At other times, these antennas have only two ports, one for emitting a polarization and the other to receive the opposite polarization.
Most radio aerials today is primarily designed to be able to send or receive radio waves in a narrow frequency band, for example. FM via VHF band II (87.5-108 MHz). Masts propagate / receives radio waves through coupling with the alternating magnetic field. These types of antenna are used for long-wave, medium-wave and short-wave up to about 6MHz. It is possible to realize antennas that operate according to this principle, up to 60 MHz.
Beamwidth: The angular range of directions in which the radiation of a beam takes a value 3 dB below the maximum. The direction in which the radiated power is halved. Ratio at the secondary main lobe (SLL): The ratio in dB between the maximum value of main lobe and the maximum value of secondary lobe. Front-back ratio (FBR): The ratio in dB between the value of maximum radiation and the same direction and opposite direction.
Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.
A transmitter with more than about 3 items are usually less sensitive in a circle slice perpendicular towards the main direction of a jet and therefore one can put antennas in close proximity to a base station. The distance between the antennas should be at least 1 / 2-1 of main wavelengths used. Further away than about 10 wavelengths (far field) affects largely the antenna radiation pattern, but it can affect radio propagation or radio broadcast.
The antenna location should have unrestricted access to just above the the sky. Earth would reflect more or less of radio waves. This depends on: mast placed as high as possible so that there are no obstructions between the transmitter and receiver. Satellite or interstellar radio propagation (Earth to satellite, space shuttle) or (satellite, space shuttle to Earth). There must be no obstructions between the satellite and ground transmitters.
The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.
If, in each of these ports, a diplexer, which separates the frequency bands of emission and reception, it will be a feeder four ports with a single antenna will be able to send and receive both polarizations simultaneously placed. At other times, these antennas have only two ports, one for emitting a polarization and the other to receive the opposite polarization.
About the Author:
You can visit www.hascall-denke.com for more helpful information about Form Of And Function Of Military Antennas.
Postingan
0 komentar:
Posting Komentar